[gmx-users] tau_p
chetana baliga
baliga.chetana at gmail.com
Fri Jan 5 13:38:55 CET 2007
Skipped content of type multipart/alternative-------------- next part --------------
title = MDP file for Full MD
cpp = /lib/cpp
integrator = MD
tinit = 0
dt = 0.002
nstcomm = 1
nsteps = 500000 ; 1 ns (run control)
nstxout = 10000
nstvout = 10000
nstxtcout = 250
nstenergy = 250
energygrps = Protein SOL ;(output control)
nstlist = 10
ns_type = grid
rlist = 1.1 ;(neighbor searching)
coulombtype = PME
;rcoulomb_switch = 1.0
rcoulomb = 1.0
vdwtype = shift
rvdw_switch = 0.9
rvdw = 1.0
fourierspacing = 0.12 ;(nm)
ewald_rtol = 1e-5
pme_order = 4 ;(electrostatics and VDW)
tcoupl = berendsen
tc_grps = Protein SOL NA+
tau_t = 0.1 0.1 0.1
ref_t = 300 300 300;(Temperature coupling)
; pressure coupling is on
pcoupl = berendsen
tau_p = 1.0
compressibility = 4.5e-5
ref_p = 1.0
gen_vel = no
constraints = all-bonds
constraint_algorithm = lincs
-------------- next part --------------
; File 'mdout.mdp' was generated
; By user: chetana (501)
; On host: alanine
; At date: Mon Jan 1 12:28:06 2007
;
; VARIOUS PREPROCESSING OPTIONS
title = MDP file for Full MD
cpp = /lib/cpp
include =
define =
; RUN CONTROL PARAMETERS
integrator = MD
; Start time and timestep in ps
tinit = 0
dt = 0.002
nsteps = 500000
; For exact run continuation or redoing part of a run
init_step = 0
; mode for center of mass motion removal
comm-mode = Linear
; number of steps for center of mass motion removal
nstcomm = 1
; group(s) for center of mass motion removal
comm-grps =
; LANGEVIN DYNAMICS OPTIONS
; Temperature, friction coefficient (amu/ps) and random seed
bd-temp = 300
bd-fric = 0
ld-seed = 1993
; ENERGY MINIMIZATION OPTIONS
; Force tolerance and initial step-size
emtol = 10
emstep = 0.01
; Max number of iterations in relax_shells
niter = 20
; Step size (1/ps^2) for minimization of flexible constraints
fcstep = 0
; Frequency of steepest descents steps when doing CG
nstcgsteep = 1000
nbfgscorr = 10
; OUTPUT CONTROL OPTIONS
; Output frequency for coords (x), velocities (v) and forces (f)
nstxout = 10000
nstvout = 10000
nstfout = 0
; Checkpointing helps you continue after crashes
nstcheckpoint = 1000
; Output frequency for energies to log file and energy file
nstlog = 100
nstenergy = 250
; Output frequency and precision for xtc file
nstxtcout = 250
xtc-precision = 1000
; This selects the subset of atoms for the xtc file. You can
; select multiple groups. By default all atoms will be written.
xtc-grps =
; Selection of energy groups
energygrps = Protein SOL
; NEIGHBORSEARCHING PARAMETERS
; nblist update frequency
nstlist = 10
; ns algorithm (simple or grid)
ns_type = grid
; Periodic boundary conditions: xyz (default), no (vacuum)
; or full (infinite systems only)
pbc = xyz
; nblist cut-off
rlist = 1.1
domain-decomposition = no
; OPTIONS FOR ELECTROSTATICS AND VDW
; Method for doing electrostatics
coulombtype = PME
rcoulomb-switch = 0
rcoulomb = 1.0
; Dielectric constant (DC) for cut-off or DC of reaction field
epsilon-r = 1
; Method for doing Van der Waals
vdwtype = shift
; cut-off lengths
rvdw_switch = 0.9
rvdw = 1.0
; Apply long range dispersion corrections for Energy and Pressure
DispCorr = No
; Extension of the potential lookup tables beyond the cut-off
table-extension = 1
; Spacing for the PME/PPPM FFT grid
fourierspacing = 0.12
; FFT grid size, when a value is 0 fourierspacing will be used
fourier_nx = 0
fourier_ny = 0
fourier_nz = 0
; EWALD/PME/PPPM parameters
pme_order = 4
ewald_rtol = 1e-5
ewald_geometry = 3d
epsilon_surface = 0
optimize_fft = no
; GENERALIZED BORN ELECTROSTATICS
; Algorithm for calculating Born radii
gb_algorithm = Still
; Frequency of calculating the Born radii inside rlist
nstgbradii = 1
; Cutoff for Born radii calculation; the contribution from atoms
; between rlist and rgbradii is updated every nstlist steps
rgbradii = 2
; Salt concentration in M for Generalized Born models
gb_saltconc = 0
; IMPLICIT SOLVENT (for use with Generalized Born electrostatics)
implicit_solvent = No
; OPTIONS FOR WEAK COUPLING ALGORITHMS
; Temperature coupling
tcoupl = berendsen
; Groups to couple separately
tc_grps = Protein SOL NA+
; Time constant (ps) and reference temperature (K)
tau_t = 0.1 0.1 0.1
ref_t = 300 300 300
; Pressure coupling
pcoupl = berendsen
Pcoupltype = Isotropic
; Time constant (ps), compressibility (1/bar) and reference P (bar)
tau_p = 1.0
compressibility = 4.5e-5
ref_p = 1.0
; Random seed for Andersen thermostat
andersen_seed = 815131
; SIMULATED ANNEALING
; Type of annealing for each temperature group (no/single/periodic)
annealing =
; Number of time points to use for specifying annealing in each group
annealing_npoints =
; List of times at the annealing points for each group
annealing_time =
; Temp. at each annealing point, for each group.
annealing_temp =
; GENERATE VELOCITIES FOR STARTUP RUN
gen_vel = no
gen-temp = 300
gen-seed = 173529
; OPTIONS FOR BONDS
constraints = all-bonds
; Type of constraint algorithm
constraint_algorithm = lincs
; Do not constrain the start configuration
unconstrained-start = no
; Use successive overrelaxation to reduce the number of shake iterations
Shake-SOR = no
; Relative tolerance of shake
shake-tol = 1e-04
; Highest order in the expansion of the constraint coupling matrix
lincs-order = 4
; Number of iterations in the final step of LINCS. 1 is fine for
; normal simulations, but use 2 to conserve energy in NVE runs.
; For energy minimization with constraints it should be 4 to 8.
lincs-iter = 1
; Lincs will write a warning to the stderr if in one step a bond
; rotates over more degrees than
lincs-warnangle = 30
; Convert harmonic bonds to morse potentials
morse = no
; ENERGY GROUP EXCLUSIONS
; Pairs of energy groups for which all non-bonded interactions are excluded
energygrp_excl =
; NMR refinement stuff
; Distance restraints type: No, Simple or Ensemble
disre = No
; Force weighting of pairs in one distance restraint: Conservative or Equal
disre-weighting = Conservative
; Use sqrt of the time averaged times the instantaneous violation
disre-mixed = no
More information about the gmx-users
mailing list