December 2007 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Sat Dec 1 06:14:37 CEST 2007
Ending: Mon Dec 31 21:16:34 CEST 2007
Messages: 378

[gmx-users] non-zero potential in pure POPC bilayer Odd profile across bilayer Pedro Alexandre de Araújo Gomes Lapido Loureiro
[gmx-users] Segmentation fault Marcelo Müller
[gmx-users] segmentation fault Marcelo Müller
[gmx-users] how to restraint peptide bond Mark Abraham
[gmx-users] lincs problems Mark Abraham
[gmx-users] problem with npt Mark Abraham
[gmx-users] pbc problem Mark Abraham
[gmx-users] Calculating velocity profile for nanochannel fluid flow Mark Abraham
[gmx-users] Installation problems of an mpi version on SUSE 10.2 Mark Abraham
[gmx-users] compiling gromacs-3.3.1 on itanium2 with icc and ifort Mark Abraham
[gmx-users] Installation on IBM AIX Mark Abraham
[gmx-users] gromacs installation in IBM BLUEGENE Mark Abraham
[gmx-users] Replica Exchange MD using Gromacs Mark Abraham
[gmx-users] Re: gmx-users Digest, Vol 44, Issue 14 Mark Abraham
[gmx-users] replica exchange: >4 processors Mark Abraham
[gmx-users] AMBER ff99SB port problems Mark Abraham
[gmx-users] AMBER ff99SB port problems Mark Abraham
[gmx-users] Unknown error Mark Abraham
[gmx-users] Methanol SOL :Number of solvent molecules = 0 Mark Abraham
[gmx-users] pbc and tpr file Mark Abraham
[gmx-users] rvdw vs cut-off / different types of non bonded interactions Mark Abraham
[gmx-users] is there performance data for GROMACS on Blue Gene/L? Mark Abraham
[gmx-users] trajectory concatenation Mark Abraham
[gmx-users] non-zero total charge for water Mark Abraham
[gmx-users] Reproducing runs Mark Abraham
[gmx-users] problem with npt Mark Abraham
[gmx-users] rtp Mark Abraham
[gmx-users] Membrane protein MD Simulation Mark Abraham
[gmx-users] determining of Kn and Posn in Umbrella sampling Mark Abraham
[gmx-users] coupling to water bath Mark Abraham
[gmx-users] Membrane protein MD Simulation Mark Abraham
[gmx-users] coupling to water bath Mark Abraham
[gmx-users] Membrane protein MD Simulation Mark Abraham
[gmx-users] problem with npt Mark Abraham
[gmx-users] Force constant for umbrella sampling potential Mark Abraham
[gmx-users] lack of opls parameter of amino group Mark Abraham
[gmx-users] karthik Mark Abraham
[gmx-users] regarding range checking error and constraint errors in Lincs algorithm Mark Abraham
[gmx-users] mdrun with multiple threads support Mark Abraham
[gmx-users] Gromacs-MPI cygwin Mark Abraham
[gmx-users] Brownian dynamics Mark Abraham
[gmx-users] Brownian dynamics Mark Abraham
[gmx-users] REMD using Gromacs 3.2.1 Mark Abraham
[gmx-users] problem with generating itp file for my own ligand Mark Abraham
[gmx-users] Brownian dynamics Mark Abraham
[gmx-users] pmf.xvg Mark Abraham
[gmx-users] generating a box containing NaOH + water Mark Abraham
[gmx-users] Segmentation fault Mark Abraham
[gmx-users] Segmentation fault Mark Abraham
[gmx-users] Residue 'COA' not found in residue topology database Mark Abraham
[gmx-users] problem in bilayer simulation Mark Abraham
[gmx-users] pressure average in 3.3.1 Mark Abraham
[gmx-users] problem in bilayer simulation Mark Abraham
[gmx-users] segmentation fault Magnus Andersson
[gmx-users] insert protein in membrane Magnus Andersson
[gmx-users] insert protein in membrane again Magnus Andersson
[gmx-users] membranes & proteins revisited Magnus Andersson
[gmx-users] fullerene topology Vasilii Artyukhov
[gmx-users] GROMACS and GPU (and PS3) Vasilii Artyukhov
[gmx-users] Gromacs-MPI cygwin Vasilii Artyukhov
[gmx-users] literature on GROMOS96 43b1 force field and vacuum simulations Carsten Baldauf
[gmx-users] question about anisotropic pressure couping Zhou Bo
[gmx-users] position restraints with npt ensemble Zhou Bo
[gmx-users] Help, Errors while compiling gromacs under Mac OS X 10.5 Leopard Bonner, Carl E.
[gmx-users] RE: gmx-users Digest, Vol 44, Issue 3 Bonner, Carl E.
[gmx-users] FW: gmx-users Digest, Vol 44, Issue 3 Bonner, Carl E.
[gmx-users] GTP topology Christian Burisch
[gmx-users] center of mass removal Christian Burisch
[gmx-users] center of mass removal Christian Burisch
[gmx-users] g_potential problem CandyCandy
[gmx-users] g_potential problem CandyCandy
[gmx-users] Specifying the number of waters Lillian Chong
[gmx-users] abnormal flip-flop when embedding cholesterol into DOPC using CG Jian Dai
[gmx-users] Problem with packmol Ananya Debnath
[gmx-users] Gel Phase in DMPC using Berger force field ?? Alan Dodd
[gmx-users] membranes & proteins revisited Alan Dodd
[gmx-users] image centering Alan Dodd
[gmx-users] problem in bilayer simulation Alan Dodd
[gmx-users] problem in pr.mdp file Alan Dodd
[gmx-users] problem in bilayer simulation Alan Dodd
[gmx-users] help regarding pull code Tawhid Ezaz
[gmx-users] GTP topology Robert Fenwick
[gmx-users] normal mode analysis Robert Fenwick
[gmx-users] fullerene topology Adam Fraser
[gmx-users] Re: fullerene topology Adam Fraser
[gmx-users] fullerene topology Adam Fraser
[gmx-users] Re: abnormal flip-flop when embedding cholesterol into DOPC using CG Ran Friedman
[gmx-users] normal mode analysis Bert de Groot
[gmx-users] Re: abnormal flip-flop when embedding cholesterol into DOPC using CG H.J.Risselada
[gmx-users] karthik Florian Haberl
[gmx-users] normal mode analysis Florian Haberl
[gmx-users] Ambconv running Shozeb Haider
[gmx-users] AMBER ff99SB port problems Shozeb Haider
[gmx-users] Writing initial coordinates to trajectory files Berk Hess
[gmx-users] Coarse-graining and tabulated non-bonded potentials- will write Berk Hess
[gmx-users] tabulated potential and long range pressure correction Berk Hess
[gmx-users] different results when using different number cpus Berk Hess
[gmx-users] Scaling Coulomb interactions with lambda, on a pair-wise basis Berk Hess
[gmx-users] Re: abnormal flip-flop when embeddingcholesterol into DOPC using Berk Hess
[gmx-users] Re: abnormal flip-flop whenembeddingcholesterol into DOPC using Berk Hess
[gmx-users] grompp allocating 0 atoms to a node Berk Hess
[gmx-users] position restraints with npt ensemble Berk Hess
[gmx-users] Gel Phase in DMPC using Berger force field ?? Jochen Hub
[gmx-users] Gel Phase in DMPC using Berger force field ?? Jochen Hub
[gmx-users] Gel Phase in DMPC using Berger force field ?? Jochen Hub
[gmx-users] Density Deferences between spc216 and tip4p water models Jochen Hub
[gmx-users] Re: Density Deferences between spc216 and tip4p Jochen Hub
[gmx-users] How to choose lipid molecules? Jochen Hub
[gmx-users] How to choose lipid molecules? Jochen Hub
[gmx-users] membrane protein Jochen Hub
[gmx-users] g_potential problem Jochen Hub
[gmx-users] AEDANS & DDPM Jochen Hub
[gmx-users] insert protein in membrane Jochen Hub
[gmx-users] problem with WHAM Jochen Hub
[gmx-users] HELP REGARDING COMMAND g_pvd Jochen Hub
[gmx-users] trajectory concatenation TANG JIAOWEI
[gmx-users] Energy minimisation JMandumpal
[gmx-users] Energy minimisation JMandumpal
[gmx-users] Energy minimisation JMandumpal
[gmx-users] Energy minimisation JMandumpal
[gmx-users] Energy minimisation JMandumpal
[gmx-users] Energy minimisation JMandumpal
[gmx-users] Chloroform JMandumpal
[gmx-users] non-zero total charge for water JMandumpal
[gmx-users] Gel Phase in DMPC using Berger force field ?? Eric Jakobsson
[gmx-users] Gel Phase in DMPC using Berger force field ?? Eric Jakobsson
[gmx-users] membrane protein Eric Jakobsson
[gmx-users] problem with npt Eric Jakobsson
[gmx-users] karthik Anupam Nath Jha
[gmx-users] scalability of gromacs-3.3 Anupam Nath Jha
[gmx-users] Brownian dynamics Yin Jian
[gmx-users] Brownian dynamics Yin Jian
[gmx-users] Brownian dynamics Yin Jian
[gmx-users] Brownian dynamics Yin Jian
[gmx-users] Brownian dynamics Yin Jian
[gmx-users] Coarse-graining and tabulated non-bonded potentials - will write Steven Kirk
[gmx-users] Diagnosing an explosion Steven Kirk
[gmx-users] Re: diagnosing an explosion Steven Kirk
[gmx-users] Re: Diagnosing an explosion Steven Kirk
[gmx-users] Warning message with 3.3.2 but not 3.3.1 Ranjani Krishnan
[gmx-users] Reproducing runs Ranjani Krishnan
[gmx-users] g_hbond (v 3.14) vs g_hbond (3.3) Anil Kumar
[gmx-users] g_hbond (Version 3.3 vs Version 3.14) Anil Kumar
[gmx-users] g_hbond (Version 3.3 vs Version 3.14) Anil Kumar
[gmx-users] g_hbond (Version 3.3 vs Version 3.14) Anil Kumar
[gmx-users] different results when using different number cpus Carsten Kutzner
[gmx-users] problem with generating itp file for my own ligand Lam Yan, Sonia
[gmx-users] Unknown error Alif M Latif
[gmx-users] Replica Exchange MD using Gromacs Justin A. Lemkul
[gmx-users] Energy minimisation Justin A. Lemkul
[gmx-users] Energy minimisation Justin A. Lemkul
[gmx-users] not center.. Justin A. Lemkul
[gmx-users] Energy minimisation Justin A. Lemkul
[gmx-users] Segmentation fault Justin A. Lemkul
[gmx-users] ffamber_chcl3.gro Justin A. Lemkul
[gmx-users] ffamber_chcl3.gro Justin A. Lemkul
[gmx-users] grompp allocating 0 atoms to a node Justin A. Lemkul
[gmx-users] grompp allocating 0 atoms to a node Justin A. Lemkul
[gmx-users] Methanol SOL :Number of solvent molecules = 0 Justin A. Lemkul
[gmx-users] segmentation fault Justin A. Lemkul
[gmx-users] problem with npt Justin A. Lemkul
[gmx-users] coupling to water bath Justin A. Lemkul
[gmx-users] coupling to water bath Justin A. Lemkul
[gmx-users] AEDANS & DDPM Justin A. Lemkul
[gmx-users] insert protein in membrane again Justin A. Lemkul
[gmx-users] regarding range checking error and constraint errors in Lincs algorithm Justin A. Lemkul
[gmx-users] Segmentation fault Justin A. Lemkul
[gmx-users] REMD using Gromacs 3.2.1 Justin A. Lemkul
[gmx-users] problem in pr.mdp file Justin A. Lemkul
[gmx-users] segmentation fault Marc F. Lensink
[gmx-users] tabulated potential and long range pressure correction Adrien Leygue
[gmx-users] Grid: 19 x 14 x 14 cells Dechang Li
[gmx-users] different results when using different number cpus Dechang Li
[gmx-users] opls parameters in distribution Erik Lindahl
[gmx-users] karthik karthik MADDHI
[gmx-users] Gromacs scaling problem M.N. Manoj
[gmx-users] opls parameters in distribution David Mobley
[gmx-users] HELLO Farzad Molani
[gmx-users] determining of Kn and Posn in Umbrella sampling Farzad Molani
[gmx-users] Force constant for umbrella sampling potential Farzad Molani
[gmx-users] Force constant for umbrella sampling potential Farzad Molani
[gmx-users] problem with WHAM Farzad Molani
[gmx-users] problem with WHAM Farzad Molani
[gmx-users] pmf.xvg Farzad Molani
[gmx-users] pmf.xvg Farzad Molani
[gmx-users] Temperature range for Gromacs (OPLS) Monika
[gmx-users] Temperature range for Gromacs (OPLS) Monika
[gmx-users] Temperature range for Gromacs (OPLS) Monika
[gmx-users] REMD using Gromacs 3.2.1 Monika
[gmx-users] REMD using Gromacs 3.2.1 Monika
[gmx-users] Grid: 19 x 14 x 14 cells Belquis Mothana
[gmx-users] generating a box containing NaOH + water Anirban Mudi
[gmx-users] Re: Density Deferences between spc216 and tip4p Nagy, Peter I.
[gmx-users] Specifying the number of waters Chris Neale
[gmx-users] problem with npt Andrei Neamtu
[gmx-users] problem with result from g_rdf Sheyore Omovie
[gmx-users] Replica Exchange MD using Gromacs Xavier Periole
[gmx-users] abnormal flip-flop when embedding cholesterol into DOPC using CG Xavier Periole
[gmx-users] problem with npt Xavier Periole
[gmx-users] Re: abnormal flip-flop when embedding cholesterol into DOPC using CG Xavier Periole
[gmx-users] Re: abnormal flip-flop when embedding cholesterol into DOPC using CG Xavier Periole
[gmx-users] Re: abnormal flip-flop when embedding cholesterol into DOPC using CG Xavier Periole
[gmx-users] Re: abnormal flip-flop when embeddingcholesterol into DOPC using Xavier Periole
[gmx-users] Methanol SOL :Number of solvent molecules = 0 Xavier Periole
Fw: Re: [gmx-users] Methanol SOL :Number of solvent molecules = 0 Xavier Periole
[gmx-users] HELLO Xavier Periole
[gmx-users] Methanol SOL :Number of solventmolecules = 0 Xavier Periole
[gmx-users] literature on GROMOS96 43b1 force field and vacuum simulations Xavier Periole
[gmx-users] How to choose lipid molecules? Xavier Periole
[gmx-users] rtp Xavier Periole
[gmx-users] coupling to water bath Xavier Periole
[gmx-users] membrane protein Xavier Periole
[gmx-users] Temperature range for Gromacs (OPLS) Xavier Periole
[gmx-users] problem with WHAM Xavier Periole
[gmx-users] Segmentation fault Xavier Periole
[gmx-users] center of mass removal Xavier Periole
[gmx-users] center of mass removal Xavier Periole
[gmx-users] deleted edr file Xavier Periole
[gmx-users] RMSD calculations by g_rms Xavier Periole
[gmx-users] AMBER ff99SB port problems TJ Piggot
[gmx-users] ffamber_chcl3.gro Mauro Puppett
[gmx-users] ffamber_chcl3.gro Mauro Puppett
[gmx-users] plot velocity of center of mass Li Qiang
[gmx-users] center of mass removal Li Qiang
[gmx-users] center of mass removal Li Qiang
[gmx-users] Gromacs on IBM cluster Marius Retegan
[gmx-users] ffamber_chcl3.gro Arthur Roberts
[gmx-users] Is there any way to do r^3 distance dependence? Arthur Roberts
[gmx-users] rtp Arthur Roberts
[gmx-users] AMBER ff99SB port problems jantonioms J. A. Mondragon S
[gmx-users] capabilities of GROMACS interfaced with Gaussian03 Lars Schaefer
[gmx-users] Replica Exchange MD using Gromacs Monika Sharma
[gmx-users] Replica Exchange MD using Gromacs Monika Sharma
[gmx-users] karthik Monika Sharma
[gmx-users] Dimer simulations using Gromacs Monika Sharma
[gmx-users] RMSD calculations by g_rms Monika Sharma
[gmx-users] modify the Lennard Jones potential Xinghua Shi
[gmx-users] Grid: 19 x 14 x 14 cells David van der Spoel
[gmx-users] Help, Errors while compiling gromacs under Mac OS X 10.5 Leopard David van der Spoel
[gmx-users] plot velocity of center of mass David van der Spoel
[gmx-users] g_hbond command problem David van der Spoel
[gmx-users] different results when using different number cpus David van der Spoel
[gmx-users] FW: gmx-users Digest, Vol 44, Issue 3 David van der Spoel
[gmx-users] Diagnosing an explosion David van der Spoel
[gmx-users] Gromacs scaling problem David van der Spoel
[gmx-users] rvdw vs cut-off / different types of non bonded interactions David van der Spoel
[gmx-users] Temperature range for Gromacs (OPLS) David van der Spoel
[gmx-users] Temperature range for Gromacs (OPLS) David van der Spoel
[gmx-users] Inconsistent shifts. David van der Spoel
[gmx-users] Inconsistent shifts. David van der Spoel
[gmx-users] insert protein in membrane David van der Spoel
[gmx-users] Different system volumes from gromacs versions 3.2.1 and 3.3.1 David van der Spoel
[gmx-users] Different system volumes from gromacs versions 3.2.1 and 3.3.1 David van der Spoel
[gmx-users] karthik David van der Spoel
[gmx-users] g_hbond (Version 3.3 vs Version 3.14) David van der Spoel
[gmx-users] mdrun with multiple threads support David van der Spoel
[gmx-users] regarding range checking error and constraint errors in Lincs algorithm David van der Spoel
[gmx-users] g_hbond (Version 3.3 vs Version 3.14) David van der Spoel
[gmx-users] scalability of gromacs-3.3 David van der Spoel
[gmx-users] center of mass removal David van der Spoel
[gmx-users] Dimer simulations using Gromacs David van der Spoel
[gmx-users] modify the Lennard Jones potential David van der Spoel
[gmx-users] pressure average in 3.3.1 David van der Spoel
[gmx-users] Inconsistent shifts. Mitchell Stanton-Cook
[gmx-users] Inconsistent shifts. Mitchell Stanton-Cook
[gmx-users] generating a box containing NaOH + water Subhrangshu Supakar
[gmx-users] deform option for shear simulation of monoatomic fluids - incorrect velocity profile Kumar V
[gmx-users] rvdw vs cut-off / different types of non bonded interactions Claus Valka
[gmx-users] rvdw vs cut-off / different types of non bonded interactions Claus Valka
[gmx-users] rvdw vs cut-off / different types of non bonded interactions Claus Valka
[gmx-users] Gel Phase in DMPC using Berger force field ?? Zoltan Varga
[gmx-users] Energy minimisation Dallas B. Warren
[gmx-users] Segmentation fault Dallas B. Warren
[gmx-users] Energy minimisation Dallas B. Warren
[gmx-users] ffamber_chcl3.gro Dallas B. Warren
[gmx-users] fullerene topology Dallas B. Warren
[gmx-users] fullerene topology Dallas B. Warren
[gmx-users] Energy minimisation Tsjerk Wassenaar
[gmx-users] Energy minimisation Tsjerk Wassenaar
[gmx-users] pbc and tpr file Tsjerk Wassenaar
[gmx-users] asking for recommendations Tsjerk Wassenaar
[gmx-users] Re: Density Deferences between spc216 and tip4p Tsjerk Wassenaar
[gmx-users] center of mass removal Tsjerk Wassenaar
[gmx-users] Residue 'COA' not found in residue topology database Tsjerk Wassenaar
[gmx-users] Fwd: Residue 'COA' not found in residue topology Tsjerk Wassenaar
[gmx-users] replica exchange: >4 processors Paul Whitford
[gmx-users] Gel Phase in DMPC using Berger force field ?? Steffen Wolf
[gmx-users] Scaling Coulomb interactions with lambda, on a pair-wise basis Matt Wyczalkowski
[gmx-users] regarding range checking error and constraint errors in Lincs algorithm Matt Wyczalkowski
[gmx-users] testing as the holidays come! P Yamin
[gmx-users] capabilities of GROMACS interfaced with Gaussian03 Seongeun Yang
[gmx-users] Re: capabilities of GROMACS interfaced with Gaussian03 Seongeun Yang
[gmx-users] Ambconv running Yang Ye
[gmx-users] different results when using different number cpus Yang Ye
[gmx-users] deleted edr file Yang Ye
[gmx-users] Gel Phase in DMPC using Berger force field ?? Myunggi Yi
[gmx-users] Gel Phase in DMPC using Berger force field ?? Myunggi Yi
[gmx-users] Gel Phase in DMPC using Berger force field ?? Myunggi Yi
[gmx-users] image centering Myunggi Yi
[gmx-users] image centering Myunggi Yi
[gmx-users] Membrane protein MD Simulation Behnoush Zare
[gmx-users] Membrane protein MD Simulation Behnoush Zare
[gmx-users] Membrane protein MD Simulation Behnoush Zare
[gmx-users] Membrane protein simulation Behnoush Zare
[gmx-users] Membrane protein simulation Behnoush Zare
[gmx-users] Membrane protein simulation Behnoush Zare
[gmx-users] mdrun with multiple threads support Limei Zhang
[gmx-users] Installation on IBM AIX Li Zhenhai
[gmx-users] Re: help regarding pull code Li Zhenhai
[gmx-users] Re: gmx-users Digest, Vol 44, Issue 14 Li Zhenhai
[gmx-users] Range checking error Yanzi Zhou
[gmx-users] Membrane protein MD Simulation Yanzi Zhou
[gmx-users] Membrane protein MD Simulation Yanzi Zhou
[gmx-users] Membrane protein simulation Yanzi Zhou
[gmx-users] Membrane protein simulation Yanzi Zhou
[gmx-users] Segmentation fault jahanshah ashkani
[gmx-users] Segmentation fault jahanshah ashkani
[gmx-users] Segmentation fault jahanshah ashkani
[gmx-users] how to restraint peptide bond nur avneet
[gmx-users] Problems using makehole program nur avneet
[gmx-users] problem using makehole program nur avneet
[gmx-users] problem with npt pragya chohan
[gmx-users] problem with npt pragya chohan
[gmx-users] problem with npt pragya chohan
[gmx-users] problem with npt pragya chohan
[gmx-users] coupling to water bath pragya chohan
[gmx-users] coupling to water bath pragya chohan
[gmx-users] coupling to water bath pragya chohan
[gmx-users] membrane protein pragya chohan
[gmx-users] problem with npt pragya chohan
[gmx-users] insert protein in membrane again pragya chohan
[gmx-users] deleted edr file pragya chohan
[gmx-users] Segmentation fault pragya chohan
[gmx-users] problem in bilayer simulation pragya chohan
[gmx-users] problem in bilayer simulation pragya chohan
[gmx-users] problem in bilayer simulation pragya chohan
[gmx-users] compiling gromacs-3.3.1 on itanium2 with icc and ifort chris.neale at utoronto.ca
[gmx-users] different results when using different number cpus chris.neale at utoronto.ca
[gmx-users] Gel Phase in DMPC using Berger force field ?? -- Focus: naming convention chris.neale at utoronto.ca
[gmx-users] Density Deferences between spc216 and tip4p water models csreddy at ncbs.res.in
[gmx-users] Re: Density Deferences between spc216 and tip4p csreddy at ncbs.res.in
[gmx-users] Force constant for umbrella sampling potential dtmirij
[gmx-users] Force constant for umbrella sampling potential dtmirij
[gmx-users] lincs problems serdar durdagi
[gmx-users] not center.. hhhh huan
[gmx-users] regarding range checking error and constraint errors in Lincs algorithm shyamala iyer
[gmx-users] regarding range checking error and constraint errors in Lincs algorithm shyamala iyer
[gmx-users] Gromacs-MPI cygwin jacopo.sgrignani at unifi.it
[gmx-users] rtp jayant_jacques
[gmx-users] AEDANS & DDPM jayant_jacques
[gmx-users] non-zero potential in pure POPC bilayer Odd profile across bilayer himanshu khandelia
[gmx-users] non-zero potential in pure POPC bilayer Odd profile across bilayer himanshu khandelia
[gmx-users] Installation problems of an mpi version on SUSE 10.2 himanshu khandelia
[gmx-users] Calculating velocity profile for nanochannel fluid flow avinash kumar
[gmx-users] HELP REGARDING COMMAND g_pvd avinash kumar
[gmx-users] How to choose lipid molecules? liang
[gmx-users] pressure average in 3.3.1 reich at mpikg.mpg.de
[gmx-users] Different system volumes from gromacs versions 3.2.1 and 3.3.1 sapna sarupria
[gmx-users] Different system volumes from gromacs versions 3.2.1 and 3.3.1 sapna sarupria
[gmx-users] Different system volumes from gromacs versions 3.2.1 and 3.3.1 sapna sarupria
[gmx-users] Methanol SOL :Number of solvent molecules = 0 sharada
[gmx-users] Methanol SOL :Number of solvent molecules = 0 sharada
Fw: Re: [gmx-users] Methanol SOL :Number of solvent molecules = 0 sharada
Fw: Re: [gmx-users] Methanol SOL :Number of solventmolecules = 0 sharada
[gmx-users] Methanol SOL :Number of solventmolecules = 0 sharada
[gmx-users] problem installing gromacs abhishek sharma
[gmx-users] regarding grompp using constraints harpreet singh
[gmx-users] problem in pr.mdp file sudheer
[gmx-users] what is position restrain? sudheer
[gmx-users] problem in pr.mdp file sudheer
[gmx-users] pbc problem tangxuan
[gmx-users] pbc and tpr file tangxuan
[gmx-users] pbc and tpr file tangxuan
[gmx-users] Dextran Simulations toma0052
[gmx-users] Residue 'COA' not found in residue topology database vijay kumar hinge vijay
[gmx-users] g_hbond command problem wangcl
[gmx-users] asking for recommendations michelle yap
[gmx-users] lack of opls parameter of amino group zhuliang at tju.edu.cn

Last message date: Mon Dec 31 21:16:34 CEST 2007
Archived on: Mon Dec 31 21:16:56 CEST 2007

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).